Warning: preg_match(): Compilation failed: group name must start with a non-digit at offset 8 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 860

Warning: preg_match(): Compilation failed: group name must start with a non-digit at offset 8 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 860

Warning: preg_match_all(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 834

Warning: Invalid argument supplied for foreach() in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 835

Warning: preg_replace(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 839

Warning: preg_match_all(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 834

Warning: Invalid argument supplied for foreach() in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 835

Warning: preg_replace(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 839

Warning: preg_match(): Compilation failed: group name must start with a non-digit at offset 8 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 860

Warning: preg_match(): Compilation failed: group name must start with a non-digit at offset 8 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 860

Warning: preg_match_all(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 834

Warning: Invalid argument supplied for foreach() in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 835

Warning: preg_replace(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 839

Warning: preg_match_all(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 834

Warning: Invalid argument supplied for foreach() in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 835

Warning: preg_replace(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 839

Warning: preg_match(): Compilation failed: group name must start with a non-digit at offset 8 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 860

Warning: preg_match_all(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 834

Warning: Invalid argument supplied for foreach() in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 835

Warning: preg_replace(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 839

Warning: preg_match_all(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 834

Warning: Invalid argument supplied for foreach() in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 835

Warning: preg_replace(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 839

Warning: preg_match(): Compilation failed: group name must start with a non-digit at offset 8 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 860

Warning: preg_match_all(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 834

Warning: Invalid argument supplied for foreach() in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 835

Warning: preg_replace(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 839

Warning: preg_match_all(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 834

Warning: Invalid argument supplied for foreach() in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 835

Warning: preg_replace(): Compilation failed: group name must start with a non-digit at offset 4 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 839

Warning: preg_match(): Compilation failed: group name must start with a non-digit at offset 8 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 860

Warning: preg_match(): Compilation failed: group name must start with a non-digit at offset 8 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 860

Warning: preg_match(): Compilation failed: group name must start with a non-digit at offset 8 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 860

Warning: preg_match(): Compilation failed: group name must start with a non-digit at offset 8 in /www/htdocs/w008c51e/wiki/includes/MagicWord.php on line 860
Simple Serial Interface - Bettyhacks.com - Hack BettyTV-Remote

Simple Serial Interface

From Bettyhacks.com - Hack BettyTV-Remote
Jump to: navigation, search
(Undo revision 1189 by MilagroGardener (Talk) Spam entfernt)
 
Line 1: Line 1:
 
== Simple Serial Interface '''V2'''==
 
== Simple Serial Interface '''V2'''==
  
Es gibt eine Neuauflage des Simlpe Serial Interface als '''V2''' welche das [[lpctool]] komplett unterstüzt (automatisches setzen von EINT und RESET) in bekannt simpler art und weise. Jedoch habe ich in der schaltung wert darauf gelegt das der COM-Port nicht geschädigt werden kann, sowie die angeschlossene Schaltung. Das führt dazu das man nicht nur 2 transistoren braucht sondern zusätzlich auch 2 dioden und einen widerstand benötigt werden. Ich empfehle in eurem interesse die paar cent mehr auszugeben.
+
Es gibt eine Neuauflage des Simple Serial Interface als '''V2''', welche das [[LPCTool]] komplett unterstüzt (automatisches Setzen von EINT und RESET) in bekannter simpler Art und Weise. Jedoch habe ich in der Schaltung Wert darauf gelegt, dass weder der COM-Port, noch die angeschlossene Schaltung geschädigt werden kann. Zusätzlich zu den 2 Transistoren braucht man daher noch 2 Dioden und einen Widerstand. Ich empfehle euch in eurem eigenem Interesse die paar Cent mehr auszugeben.
 +
 
 +
BITTE BEACHTET DIE DISKUSSIONSSEITE. Bei diesem Interface fehlen Basisvorwiderstände für die Transistoren, ausserdem passt das Betty-Interface nicht mit der Pinleiste.
 +
 
 +
Im [[http://bettyhacks.com/forum Forum]] gibt es [[http://bettyhacks.com/forum/index.php?topic=108.msg828#msg828 Fotos]]
 +
 
  
 
=== Stückliste ===
 
=== Stückliste ===
* 1 x Euro-Platine 50x90mm (ich empfehle LÖTSTREIFEN LOCHRASTER) ''Conrad: 527629''
 
* 1 x Maxim MAX 3232 CPE ''Conrad: 167108''
 
* 4 x Kondensator  1µF (Kondensatoren C1-C4 - zB Keramik, bipolar) ''Conrad: 453382''
 
* 1 x Kondensator 100nF (0,1µF) (Kondensator C5 - zB Keramik, bipolar) ''Conrad: 453099''
 
* 2 x Transistor BC 547C ''Conrad: 154989''
 
* 1 x Diode 1N4148 ''Conrad: 162280''
 
* 1 x Z-Diode 3,3V ''Conrad: 180041''
 
* 1 x Widerstand 680 Ohm ''Conrad: 403237''
 
  
 +
{| class="prettytable float-left"
  
optional:
+
| Stück ||  Bezeichnung                                                            || Conrad                  || Reichelt.de
 +
|-
 +
| 1    || Euro-Platine 50x90mm Streifenraster                                      || 527629                  || H25SR050
 +
|-
 +
| 1    || Maxim MAX 3232 CPE                                                      || 167108                  || MAX 3232 CPE
 +
|-
 +
| 4    || Kondensator 1µF (Kondensatoren '''C1-C4''' - z.B. Keramik, bipolar)      || 453382                  || RAD 1/63 **
 +
|-
 +
| 1    || Kondensator 100nF (0,1µF) (Kondensator '''C5''' - z.B. Keramik, bipolar) || 453099                  || X7R-5 100N
 +
|-
 +
| 2    || Transistor BC 547C                                                      || 154989                  || BC 547C
 +
|-
 +
| 1    || Diode 1N4148 ('''D3''')                                                  || 162280                  || 1N 4148
 +
|-
 +
| 1    || Z-Diode 3,3V ('''D4''')                                                  || 180041                  || ZF 3,3
 +
|-
 +
| 1    || Widerstand 680 Ohm ('''R1''')                                            || 403237                  || 1/4W 680
 +
|-
 +
| 1    || SUB-D9 Fermale                                                          ||                        || D-SUB BU 09FB
 +
|-
 +
| 1    || Flachbandkabel                                                          ||                        || AWG 28-10G 3M
 +
|-
 +
| 1    || IC-Sockel 16 Polig (2x8)                                                ||                        || GS 16
 +
|}
  
* 1 x IC-Sockel 16 Polig, (Bitte nicht die mit eingebautem Kondensator, der sitzt immer zwischen Pin 8 und 16, was hier nicht passen würde)
 
* 1 x SUBD Buchse, 9 Polig
 
  
simple, oder?
+
{{Ueberarbeiten|, da der Reichelt-Warenkorb fehlerhaft ist.}}
 +
 
 +
Den kompletten Einkaufskorb könnt ihr bei Reichelt direkt unter folgendem Link adden. Es ist alles drinnen, was in der oberen Liste dteht:
 +
https://secure.reichelt.de/?;ACTION=20;LA=5000;AWKID=48846;PROVID=2084 Die Kosten belaufen sich auf 8,26€.
 +
 
 +
* Die Kondensatoren von Reichelt sind POLAR also auf die Polung achten!
 +
 
 +
optional:
 +
* 1 x Flachbandkabel 10 Polig (es reicht auch wenn man ein altes IDE kabel hat und sich da die 10 Adern herausschneidet) (Rechelt: AWG 28-10G 3M)
 +
* 1 x IC-Sockel 16-polig, (Bitte nicht die mit eingebautem Kondensator, der sitzt immer zwischen Pin 8 und 16, was hier nicht passen würde) (Reichelt: GS16)
 +
* 1 x SUBD Buchse, 9-polig (Reichelt: D-SUB BU 09FB (Für Flachbandkabel))
  
 
=== Schaltplan und Layout ===
 
=== Schaltplan und Layout ===
 
Der Schaltplan:
 
Der Schaltplan:
  
[[Image:Betty-serial-schaltplan.JPG]]
+
[[Image:Betty-Serial-V2-EAGLE.jpg]]
  
Für die ganz harten, das Layout - 1 Layer:
+
Das Layout für Lochstreifenraster:
  
[[Image:Betty-serial-layout.JPG]]
+
[[Image:Betty-Serial-V2-Lochmaster.jpg]]
  
 
=== Eagle Files ===
 
=== Eagle Files ===
Line 36: Line 65:
 
=== Software ===
 
=== Software ===
 
Simple Serial Interface funktioniert mit jeder gängigen Software.<br>
 
Simple Serial Interface funktioniert mit jeder gängigen Software.<br>
* ob es nun Terminal-Programme wie hyperterminal (taugt nicht!), realterm oder minicom sind oder  
+
* ob es nun Terminal-Programme wie [[http://hp.vector.co.jp/authors/VA002416/ttermp23.zip TeraTerm]], realterm oder minicom sind oder  
 
* die Software die für die Betty erstellt wurden, von Netguy(mamalala), von hackbard oder von Colibri.
 
* die Software die für die Betty erstellt wurden, von Netguy(mamalala), von hackbard oder von Colibri.
* wenn die software [[lpctool]] genuzt wird auch mit automatischen schalten von EINT und RESET
+
* wenn die Software [[LPCTool]] genutzt wird, auch mit automatischem Schalten von EINT und RESET
 +
 
 +
=== Danke ===
 +
Mein Dank geht an dakaos für die Liste von Conrad Bestellnummern.
  
=== Fazit ===
 
Habt Spass und verbreitet die Kunde... Betty rockt.
 
  
--[[User:62.227.227.43|62.227.227.43]] 07:21, 9 November 2007 (CET)
+
--[[User:Alterego|Alterego]] 07:26, 9 November 2007 (CET)

Latest revision as of 16:06, 16 March 2010

Personal tools